Zavio D7110 User Manual download pdf (Page 34)

D5110/D5111/D7110 User Manual

Use the following IP address: Select this option when the fixed IP address is set.

IP address: Enter the IP address of the device.

Subnet mask: Enter the subnet mask.

 Default gateway: Enter the default gateway.

 Use the following DNS server address: Select this when you set the fixed address

Primary DNS server: Enter the IP address of the primary DNS server.

as the

IP address of DNS server.

Secondary DNS server: Enter the IP address of the secondary DNS server, if

necessary.

 HTTP port number: Select 80 in general situations. If you want to use a port number

other than 80, select the text box and enter a port number between 1024 and 65535.

 When you have set the HTTP port number to a number other than 80 on the Network

Setting screen in the Setup Program, access the device by typing the IP address of the

device on the web browser as follows: Example: when HTTP port number is set to

2000 http://192.168.1.100:2000/

Note: The IP Camera needs to be rebooted after it finishes changing the network setting

completely.

Note: If you connect the IP Camera with your computer directly, the default network domain

of camera is 192.168.1.xx

6.3.2 PPPoE

If your ISP provides Dynamic IP with authentication by username and password, type all

PPPoE information in this part. When using the PPPoE function, you need to turn on the

DDNS or IP Notification function at same time.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 84 85

No comments

Zavio D7110 User Manual Page 34